Basic Info.
Type
Finished Batteries Tester
Application
Lithium-ion Battery
Product Description
Product Name: TG6000-100V 15A Charge 200A Discharge PACK Testing System 1. System Function Description:a. The function of the test instrument is divided into two parts: battery production test mode and calibration mode. Therefore, the device can be used as an electronic load and comprehensive testing instrument.b. The specific test items: test battery open-circuit voltage, battery AC internal resistance, continuous charging current, continuous charging voltage, continuous discharge current, continuous discharge voltage, charging overcurrent protection current, discharge overcurrent protection current, and short circuit protection time. Overcurrent delay time, the voltage after the test. The device uses an infrared scanning gun bar code input (SN) to start the test or automatically starts the test when a voltage is detected .2, Scope of application of equipment:For lithium-ion batteries (CH + P + CH- P-), all series of power batteries.- 3.6V-100V test open circuit voltage
- Trial charging voltage test
- Charging current test (0-15A)
- Internal resistance test (0-4000 milliohms)
- Discharge current test (0-200A)
- Load voltage test
- Over-discharge current test (0-500A) for 3S
- Overcurrent recovery voltage test
- Setting of shelf time
- Setting of discharge time and current
- Overcurrent protection delay time setting
- Overcurrent step current setting
- Short circuit test (8000A)
3, Test items- Voltage: The test instrument tests the voltage twice, once is the no-load voltage, and then the voltage after all items are tested, especially the short-term warranty, to ensure that the battery is normal after the short-term warranty. The secondary voltage is smaller than the primary voltage.
- The 1000hz AC internal resistance of the battery is tested.
- Charging overcurrent protection current: First of all, confirm whether the battery has a large charging current, and then the automatic protection function. If the charging current is large, the battery has no protection function and it is easy to burn out the protective circuit board in the battery. The charging overcurrent protection current function is very important. If not, choose continuous charging current.
- Continuous charging current: For a circuit board with a battery that does not have a large charging current automatic protection function, such a battery generally chooses the same current value as the charger when charging.
- Discharge overcurrent protection current: When the discharge current exceeds a certain value, it will automatically protect. Generally, it can be set according to the parameters of the specification.
- Continuous discharge current: refers to the discharge current of the battery during normal use. If there is a problem with the circuit board, the phenomenon of continuous discharge will not occur.
- Short-circuit protection time: When the positive and negative terminals of the battery are short-circuited immediately, the protection board turns off the reaction time. Due to the large current in the short-circuit, if the reaction time is too slow, it is easy to cause the circuit board to burn out. Therefore, the faster the time, the battery protection The better, it is generally below 1000us. If the internal resistance value of the entire circuit is too large during a short circuit, the short circuit time will be too long. Therefore, when the short circuit is too large, you must analyze the cause.
- The device has no inrush current during the working process and will not damage the protective plate in the battery pack.
4,Technical Parameters1.Voltage range (0-100V) Accuracy 1mV (if customers have higher requirements for voltage, they can be customized),RD±0.1% + FS±0.1% 2.Internal resistance range (0-4000 milliohms) , Accuracy: 0.001 milliohms RD±0.1% + FS±0.1%
3.Discharge current (0-200A) at the highest voltage, continuous discharge current 200A, accuracy 0.001A (if customers have higher current requirements can be customized),RD±0.1% + FS±0.1%4.Short-circuit time (0-2000uS) Accuracy: 1uS
5.MAX Power:1500W
Address:
911, huiyi building, dalang street, longhua district, shenzhen
Business Type:
Manufacturer/Factory
Business Range:
Electrical & Electronics, Industrial Equipment & Components, Manufacturing & Processing Machinery, Metallurgy, Mineral & Energy
Company Introduction:
Shenzhen TaiGeDa Electronic Technology Co., Ltd is a national high-tech enterprise integrating R&D, manufacturing, sales and technical services. We have established and perfected a high-quality target management system to provide a complete set of production equipment and technical services for lithium-lion assembly and manufacturing of new energy sources. Adhering to the concept of percentage investment, patient service and trustworthy operation, the company is committed to becoming a first-class new energy lithium battery assembly equipment and technical service provider.
